glue
Glue UHU MAX REPAIR, 8 g - Image 2

Glue UHU MAX REPAIR, 8 g

4,04€ inc. Vat

Strong and flexible glue for all types of bonding.

Out of stock
SKU: LEP-UMR-8 Category:

Properties

Time for correction

5 minutes
Curing time

24 hours
Temperature resistance

-40 to 120 °C
Glue weight

8 g

Product description

Extremely strong and flexible glue suitable for all types of bonding and repairs. It is water resistant and suitable for both indoor and outdoor use. Resistant to vibration, aging and UV rays. Contains no solvents.

Repairs are possible within 5 minutes, maximum hardness is reached after 24 hours

Scope of application

Suitable for bonding metals, wood, leather, glass, plastic, rubber, porcelain, stone and many other materials.

Not suitable for PE (polyethylene), PP (polypropylene) and PTFE (Teflon).

Instructions for use

Clean the glued surfaces of dirt, grease and moisture. Apply glue to one of the glued surfaces and join the glued parts. Correction is possible after 5 minutes.

Tips from SilneMagnety.sk

In addition to the official information from the manufacturer, we have prepared a few more tips for sticking magnets:

  • Remove grease with acetone, isopropyl alcohol or other solvent. Ordinary alcohol can also fulfil this purpose. Grease can get on the magnet with a simple fingerprint. Removing grease can have a huge impact on the strength of the joint.
  • Roughen the surface of the magnet with sandpaper. You can also make grooves in the magnet with a nail:

 Roughened magnets before glue application

  • Make sure that there are no magnetic metals or other magnets around the magnet during curing that pull it away from the surface you are bonding the magnet to.
  • You can also use the power of the magnet to your advantage: place a metal object or another magnet on the opposite side of the glued object. The magnet will then be strongly attracted to the surface and fixed well until the glue dries.
  • You can also try our self-adhesive magnets or use magnets with a screw hole.

As an alternative to UHU Max Repair, you can also use UHU Plus Endfest 300 two-component epoxy adhesive for bonding magnets.

You might also like: